Isotoon

Organic chemistry study videos, one mechanism at a time

Isotoon publishes short animated organic chemistry explainers you can watch free, one mechanism or idea per video, from SN1 versus SN2 to reading an IR spectrum. When the step you're stuck on isn't here, type your question and get a new video made around it.

  • College organic chemistry I and II
  • IB Chemistry (organic topics)

Ask your own

Short organic chemistry study videos

Each video below takes one mechanism or idea and animates it: the electrons move along the curved arrows, the leaving group leaves, the ring flips. Most run under a minute. A few are interactive diagrams or 3D scenes you can turn and step through. Each has its own page with what the film shows written out, so you can read it as well as watch it.

They are built for college Organic Chemistry I and II. Watch the one closest to the step you're stuck on. If none of them is quite your question, ask it in the box above and a new video gets made around your exact wording.

Every organic chemistry video, by topic

Substitution and elimination:

Arrows, orbitals and resonance:

Stereochemistry and conformations:

Reactions:

Functional groups, naming and spectroscopy:

How to study with these shorts

A short video shows you the step. It does not put the step in your hands; drawing does that.

  1. Watch the video for the one step you're stuck on, start to finish.
  2. Pause and draw the mechanism yourself on blank paper: every arrow, intermediate and formal charge.
  3. Check your drawing against the video or your textbook, and write one line on anything you got wrong.
  4. Rewatch it from your notebook 1, 3, 7, 14 and 30 days later, and redraw it before each rewatch.

For the whole method, read how to study organic chemistry with short videos. For exam strategy beyond the videos (reaction maps, problem sets, office hours), see how to study for organic chemistry exams.

Watch an example

2D video · 34 seconds

When does a reaction go SN1 instead of SN2?

Shows SN1, where bromide leaves first and a carbocation forms, beside SN2's one-step backside attack, then crowds the carbon with three methyl groups so SN2 stalls while the cation is stabilized by the methyls and by polar protic water: tertiary carbons, weak nucleophiles and protic solvents favor SN1.

Scenes, in order:

  1. The leaving group goes first
  2. SN2: one step, backside attack
  3. Crowded carbon blocks attack
  4. Stable cation, polar protic solvent
  5. SN1: tertiary, weak nucleophile, protic
3D model · 19 seconds · no sound

Why does an SN2 reaction invert the stereocenter?

An interactive 3D scene of an SN2 reaction: hydroxide approaches the carbon from the side opposite bromine, its lone pair filling the C–Br antibonding lobe; at the five-coordinate transition state the three groups flatten, and as C–O forms and C–Br breaks they flip through like an umbrella, turning the S reactant into the R product.

Labeled in the scene:

  • Reactants approach
  • Backside attack
  • Transition state
  • Umbrella flips
  • Bromide leaves
2D video · 35 seconds

What is the difference between E1 and E2 eliminations?

Runs E2 as one concerted step in which the base pulls a proton as bromide leaves (rate = k[RX][base]), then E1, where bromide leaves alone to form a flat carbocation before a weak base takes a neighboring proton, and ends on their energy diagrams side by side: one step against two.

Scenes, in order:

  1. One step or two?
  2. E2: concerted, bimolecular
  3. E1: leaving group goes first
  4. Then the base strikes
  5. Side by side
2D video · 35 seconds

How do you push arrows in a reaction mechanism?

Follows hydroxide attacking bromomethane: each curved arrow moves two electrons, its tail starting on a lone pair or bond and its head on the electron-poor carbon, and a second arrow breaks the C–Br bond, giving HO⁻ + CH3Br → CH3OH + Br⁻.

Scenes, in order:

  1. Arrows Move Electrons, Not Atoms
  2. Tail Starts at Electrons
  3. Head Points to Electron-Poor
  4. Second Arrow Breaks a Bond
  5. Electrons Flow: Rich to Poor
2D video · 38 seconds

Why are tertiary carbocations more stable than primary ones?

Starts from a carbon that has lost a bond and holds an empty p orbital, shows a primary cation with one carbon neighbor, then hyperconjugation as neighboring C–H bonds feed the empty orbital, and a tertiary cation with nine such C–H bonds plus inductive donation, ending on an energy ladder: 3° < 2° < 1°.

Scenes, in order:

  1. A carbon missing two electrons
  2. Primary: one neighbor helps
  3. Hyperconjugation: neighbors share electrons
  4. Tertiary: three neighbors donate
  5. Spread charge means stability
2D video · 38 seconds

What makes a good leaving group?

Iodide snaps off carbon while fluoride holds on. A good leaving group is a weak base that stays stable holding the electron pair it takes; iodide's large cloud spreads the charge thin, HI (pKa about −10) is a strong acid while HF (3.2) is weak, and the ranking ends I⁻ > Br⁻ > Cl⁻ > F⁻.

Scenes, in order:

  1. Iodide leaves, fluoride stays
  2. Good leaving group: weak base
  3. Bigger ion spreads charge
  4. Strong acid, great leaving group
  5. I− > Br− > Cl− > F−
2D interactive · 24 seconds · no sound

How do the energy diagrams of SN1 and SN2 compare?

An interactive diagram of SN1 and SN2 between the same reactants and products: SN2 crosses one transition state with no intermediate, while SN1 climbs its highest barrier as the leaving group departs, rests in the carbocation's valley and crosses a small second barrier; a substitution slider raises SN2's barrier and lowers SN1's.

Labeled in the scene:

  • Same start and end
  • SN2 concerted step
  • SN1 slow ionization
  • Carbocation intermediate
  • Fast nucleophile attack
  • Compare the barriers
3D model · 30 seconds · no sound

What makes a molecule chiral?

An interactive 3D scene of a carbon holding four different groups and its reflection: lifted and turned, the mirror image never matches all four groups, so the two are non-superimposable enantiomers, like hands; swap bromine for a second chlorine and the image overlaps exactly, so the molecule is achiral.

Labeled in the scene:

  • Four different groups
  • Mirror image
  • Try to overlap
  • Spin it around
  • Enantiomers
  • Two groups alike
2D video · 34 seconds

How do you assign R and S to a stereocenter?

Ranks the four groups on a stereocenter by the atomic number of the attached atom (Br > Cl > CH3 > H), turns the molecule so hydrogen points away, traces 1 → 2 → 3 clockwise for R, then does the same on its mirror image, which runs counterclockwise: S.

Scenes, in order:

  1. Mirror twins, different drugs
  2. Rank by atomic number
  3. Point lowest priority away
  4. Trace one, two, three
  5. The mirror is S
3D model · 31 seconds · no sound

Why is the chair conformation of cyclohexane more stable?

An interactive 3D scene of cyclohexane as a chair and a boat: puckering keeps C–C–C angles near 109.5°, the chair's C–H bonds are all staggered while the boat's sides are eclipsed and its two flagpole hydrogens crowd each other, so the chair, free of angle, torsional and steric strain, sits about 29 kJ/mol lower.

Labeled in the scene:

  • Two ring shapes
  • Angles near tetrahedral
  • Chair: all staggered
  • Boat: eclipsed sides
  • Flagpole clash
  • Chair wins
3D model · 28 seconds · no sound

What is the difference between eclipsed and staggered ethane?

An interactive 3D scene of ethane: in the staggered conformation the back hydrogens sit between the front ones, 60° apart and lowest in energy; rotating the C–C bond, which breaks nothing, brings them into line at 0°, the eclipsed conformation, about 12 kJ/mol higher, and at room temperature the molecule turns constantly.

Labeled in the scene:

  • Ethane, C₂H₆
  • Staggered conformation
  • Rotate the C–C bond
  • Eclipsed conformation
  • Constant interconversion
3D model · 29 seconds · no sound

What do sp3, sp2 and sp hybrid orbitals look like?

An interactive 3D scene of carbon's orbitals: one spherical 2s and three dumbbell 2p mix into four sp³ lobes 109.5° apart, three sp² lobes at 120° with one p left over, or two sp lobes at 180° with two p left, then the three side by side: more s character means shorter, fatter lobes and wider angles.

Labeled in the scene:

  • Carbon's valence orbitals
  • sp³: mix all four
  • sp²: mix three
  • sp: mix two
  • Side by side
2D video · 36 seconds

What is resonance, and why does it make a molecule more stable?

Draws carbonate's three resonance structures, which move only electrons, then the real hybrid with every C–O bond about 1⅓ and each oxygen carrying ⅔ of a negative charge, and shows why spreading the charge lowers the energy below any single structure.

Scenes, in order:

  1. Neither drawing is real
  2. Resonance structures
  3. The hybrid is real
  4. Spread charge, lower energy
  5. Resonance energy
2D video · 39 seconds

Why is benzene so stable?

Bromine water decolorizes cyclohexene but not benzene. Kekulé's alternating bonds give way to the measured ring, every bond 139 pm, then six p orbitals overlap so six π electrons delocalize around it, lowering its energy by about 152 kJ/mol: the aromatic stability that resists addition.

Scenes, in order:

  1. Benzene refuses to react
  2. Kekulé's guess: alternating bonds
  3. Every bond measures 139 pm
  4. Six electrons spread around
  5. 152 kJ/mol more stable
2D video · 37 seconds

What does Markovnikov's rule say about adding HBr to an alkene?

Adds HBr to propene: of the two possible products, almost only 2-bromopropane forms, because the proton adds to the carbon that already has more hydrogens, leaving the more stable secondary carbocation, which bromide then attacks.

Scenes, in order:

  1. Bromine Picks the Crowded Carbon
  2. Two Possible Products
  3. Step One: Proton Adds
  4. Secondary Carbocation Wins
  5. Hydrogen Goes Where Hydrogen Is
3D model · 23 seconds · no sound

How does a Diels-Alder reaction form a ring?

An interactive 3D scene of s-cis butadiene and ethylene approaching face to face, the diene's HOMO lining up with the dienophile's LUMO, then electrons flowing around a six-atom loop as three π bonds break and two σ bonds and one π bond form together, leaving cyclohexene.

Labeled in the scene:

  • Diene meets dienophile
  • Orbitals line up
  • Electrons flow
  • Transition state
  • Cyclohexene formed
2D interactive · 26 seconds · no sound

When does the kinetic product win over the thermodynamic one?

An interactive diagram of one reactant with two pathways: the lower barrier makes the kinetic product fastest, cold molecules rarely cross back over the reverse barrier, but with enough heat and time they drain into the deeper thermodynamic well, so cold and short favors the kinetic product and hot and long the thermodynamic one.

Labeled in the scene:

  • Two competing pathways
  • Lower barrier forms first
  • Can it go back?
  • Given enough time
  • Who wins
2D video · 32 seconds

How is an aldehyde different from a ketone?

Both share a carbonyl, carbon double-bonded to oxygen. In an aldehyde it sits at the end of the chain, bonded to a hydrogen; in a ketone it sits mid-chain with carbon on both sides. That hydrogen lets aldehydes oxidize to acids (Tollens' test) while ketones resist.

Scenes, in order:

  1. One hydrogen changes everything
  2. Both share a carbonyl
  3. Location: end or middle
  4. Ketone: carbons on both sides
  5. Aldehyde H oxidizes easily
2D video · 32 seconds

How do you name an alkane with IUPAC rules?

Names one branched alkane step by step: trace the longest chain (six carbons, hexane), call the one-carbon branch a methyl substituent, number from the end nearest the branch so it sits on carbon 2, and put locant, substituent and parent together: 2-methylhexane.

Scenes, in order:

  1. One molecule, one exact name
  2. Find the longest chain
  3. Branch becomes a substituent
  4. Number from the nearest end
  5. Locant, substituent, parent
2D video · 43 seconds

How do you read an IR spectrum for functional groups?

Explains that each bond vibrates like a spring and absorbs infrared light only at its own frequency, reads the functional-group region left of 1500 cm⁻¹ (broad O–H near 3300, C–H just under 3000, C=O near 1715), leaves the fingerprint region alone, and identifies a carboxylic acid from its O–H and C=O peaks.

Scenes, in order:

  1. One dip reveals a carbonyl
  2. Bonds absorb their own frequency
  3. Left side: functional groups
  4. Fingerprint region: leave it
  5. Peaks add up to identity

Organic chemistry: the ideas students ask about most

Organic chemistry is a three-dimensional subject taught on flat paper. Ask about a mechanism or a chiral center and turn the molecule around until it makes sense.

Why does an SN2 reaction invert the stereocenter?

In an SN2 reaction the nucleophile attacks the carbon from the side opposite the leaving group, and the new bond forms as the old one breaks, in a single step. Because the attack comes from behind, the other three groups flip over like an umbrella in the wind, inverting the stereocenter. The rate depends on both the substrate and the nucleophile, and crowded tertiary carbons block the approach.

When does a reaction go SN1 instead?

An SN1 reaction takes two steps: the leaving group leaves first, giving a flat carbocation, and the nucleophile then adds to either face of it. That is why SN1 tends to give a mix of both configurations. It is favored by tertiary carbons, which stabilize the carbocation, by weak nucleophiles, and by polar protic solvents such as water and alcohols.

What makes a molecule chiral?

A molecule is chiral when it cannot be superimposed on its mirror image, the way a left hand cannot be laid exactly over a right one. The usual cause is a carbon bonded to four different groups, called a stereocenter. The two mirror-image forms, enantiomers, share boiling points and most other properties, but they rotate plane-polarized light in opposite directions and can act very differently in the body.

Questions to try

The ones marked 3D become a model you can turn, step through and tap.

What you can ask about

  • Reaction mechanisms and arrow pushing
  • SN1, SN2, E1 and E2
  • Stereochemistry and chirality
  • Conformations and ring strain
  • Functional groups
  • Resonance
  • Spectroscopy basics

Every claim is checked before anything is drawn, and every video lists its sources. See plans

Questions

How long are the organic chemistry videos?
Most run under a minute. Each one covers a single mechanism or idea, so it starts at the step and ends when the explanation does. A video you make yourself is up to 30 seconds on Basic and up to 60 seconds on Pro.
Do these replace my textbook or a lecture channel?
No. They are short explainers for the step you're stuck on, not a full course. Use your textbook and lectures to learn the material in order, and use a short video when one mechanism or idea will not click.
How accurate are the videos?
Every factual claim in a script is checked before anything is animated, and a video you make lists its sources under it. Some library pages, such as E1 vs E2 and IR spectroscopy, also list the references they were checked against. If something disagrees with your course, go with your professor and textbook and ask about it.
Do they fit Organic Chemistry I and II?
Yes. They cover ideas from both semesters of a typical college sequence: substitution and elimination, stereochemistry, conformations, resonance, addition reactions, carbonyls and IR. Courses order topics differently, so match them to your syllabus.